OPTIMIZATION OF THE PERFORMANCE OF THE SANDSTONE CRUSHING PLANT UNIT AT PT PULAU LEMON

  • Esthi Kusdarini Institut Teknologi Adhi Tama Surabaya
  • Sylvesiana Ayunida Sasti Institut Teknologi Adhi Tama Surabaya
  • Avellyn Shinthya Sari Institut Teknologi Adhi Tama Surabaya
DOI: https://doi.org/10.33579/krvtk.v9i1.4899
Keywords: belt conveyor, jaw crusher, kehilangan material; pasir dan batu

Abstract

The process of processing sandstone material at the PT Pulau Lemon crushing unit is not yet optimal. This is due to differences in the amount of material entering and leaving the crushing unit. To optimize the performance of the processing unit, it is necessary to conduct research on the causes of material loss. Furthermore, the research aims to: 1) calculate material loss; 2) assess the causes of material loss and determine efforts to minimize material loss. The research was carried out using mathematical calculations using mass balance equations for material entering and leaving the processing unit, field observations and interviews. The research results showed that the amount of incoming material was 16.66 tons/day and outgoing material was 14.85 tons/day, so the material lost was 1.81 tons/day. or 10.80%. Material loss is caused by the slope of the conveyor belt being less than gentle and some parts being torn, wind, rain and mechanical problems. Efforts to optimize the performance of processing units include reducing waiting times, regularly checking and repairing equipment, and installing roofs.

Downloads

Download data is not yet available.

Author Biographies

Sylvesiana Ayunida Sasti, Institut Teknologi Adhi Tama Surabaya

Teknik Pertambangan

Avellyn Shinthya Sari, Institut Teknologi Adhi Tama Surabaya

Teknik Pertambangan

References

[1] A. Jailani, A. Triantoro, and R. N. Hakim, “Perencanaan Tambang Pada Lokasi Pit East Dan Pit West Di Pt Wings Sejati Jobsite PT Bangun Nusantara Jaya Makmur,” Geosapta, vol. 4, no. 2, 2018.
[2] E. A. Kudmasa, E. Kusdarini, R. H. K. Puti, and O. Priambo, “EVALUASI CRUSHING PLANT UNTUK PENGOPTIMALAN HASIL PRODUKSI BATU ANDESIT,” in Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), 2021, pp. 198–201.
[3] M. Ridwan, S. Solihin, and P. Pramusanto, “ANALISIS KINERJA CRUSHING PLANT "A" DI PD ALAM JAYA, KECAMATAN BALEENDAH, KABUPATEN BANDUNG PROVINSI JAWA BARAT,” in Prosiding Teknik Pertambangan, 2019, pp. 200–205.
[4] F. M. W. Malau and H. P.Perangin-Angin, “PRODUKSI CRUSHING PLANTPT PULAU LEMON KABUPATEN MANOKWARI,” INTAN J. Penelit. Tambang, vol. 3, no. 2, pp. 117–124, 2020.
[5] K. E. Akbar, L. Pulungan, and S. Solihin, “ANALISIS KINERJA UNIT CRUSHING PLANT UNTUK OPTIMALISASI PRODUKSI BATU ANDESIT DI PT. NURMUDA CAHAYA (KONTRAKTOR PT. BUDI DAYA REMAJA) BATUJAJAR TIMUR KECAMATAN BATUJAJAR KABUPATEN BANDUNG BARAT JAWA BARAT,” in Prosiding Teknik Pertambangan, 2020, pp. 710–714, doi: DOI: http://dx.doi.org/10.29313/pertambangan.v6i2.23889.
[6] C. O. Martins, A. S. Sari, R. H. K. Putri, E. Kusdarini, and F. A. Redanto, “KAJIAN TEKNIS ALAT PEREMUK UNTUK MENINGKATKAN PRODUKSI PT. GUNUNG PUNCAK SALAM PROVINSI JAWA BARAT,” J. Metall. Eng. Process. Technol., vol. 2, no. 2, pp. 80–88, 2022.
[7] C. O. Martins, A. S. Sari, R. H. K. Putri, E. Kusdarini, and F. A. R. Putri, “KAJIAN TEKNIS ALAT PEREMUK UNTUK MENINGKATKAN PRODUKSI PT. GUNUNG PUNCAK SALAM PROVINSI JAWA BARAT,” J. Metall. Eng. Process. Technol., vol. 2, no. 2, pp. 80–88, 2022.
[8] I. Ihsan, L. Pulungan, and S. Widayati, “ANALISIS KINERJA BELT CONVEYOR UNTUK OPTIMASI PRODUKSI BATUAN ANDESIT (STUDI KASUS : PT NURMUDA CAHAYA, DESA BATUJAJAR TIMUR, KECAMATAN BATUJAJAR KABUPATEN BANDUNG BARAT, PROVINSI JAWA BARAT),” in Prosiding Teknik Pertambangan, 2019, pp. 234–241, doi: DOI: http://dx.doi.org/10.29313/pertambangan.v0i0.15041.
[9] M. H. Eliansyah and Sriyanti, “Evaluasi Kinerja Crushing Plant di PT X Desa Cipinang, Kecamatan Rumpin, Kabupaten Bogor, Provinsi Jawa Barat,” J. Ris. Tek. Pertamb., pp. 132–139, 2021, doi: https://doi.org/10.29313/jrtp.v1i2.536CorrespondingAuthorEmail.
Published
2024-04-18
How to Cite
[1]
E. Kusdarini, S. Ayunida Sasti, and A. Shinthya Sari, “OPTIMIZATION OF THE PERFORMANCE OF THE SANDSTONE CRUSHING PLANT UNIT AT PT PULAU LEMON ”, Journal Technology of Civil, Electrical, Mechanical, Geology, Mining, and Urban Design, vol. 9, no. 1, pp. 55-62, Apr. 2024.
Issue
Vol 9 No 1 (2024): Energy Management and Sustainable Environment
Section
Articles

Copyright (c) 2024 Esthi Kusdarini, Sylvesiana Ayunida Sasti, Avellyn Shinthya Sari

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

All articles published Open Access will be immediately and permanently free for everyone to read and download.  We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:
• Creative Commons Attribution-ShareAlike (CC BY-SA)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.