SIMULASI PROSES PENGECORAN DALAM TAHAPAN REVERSE ENGINEERING TOOLPOST MESIN BUBUT KONVENSIONAL

  • Agus Dwiyanto Institut Teknologi Nasional Yogyakarta
  • Hasanudin Institut Teknologi Nasional Yogyakarta
  • Muhammad Diki Setiawan Institut Teknologi Nasional Yogyakarta
  • Kurniawan Institut Teknologi Nasional Yogyakarta
DOI: https://doi.org/10.33579/krvtk.v9i2.5478

Abstract

Reverse engineering is an innovation in product development. Existing products are analyzed for further development or performance enhancement. This research focuses on the application of reverse engineering methods to create a toolpost, considering the need for toolpost spare parts for conventional lathes, which still relies on imports and is often unavailable in the market due to the discontinuation of manufacturers. The stages involved include gathering product information, analyzing functional features, measuring and modeling the toolpost, and conducting manufacturability analysis through casting simulation. This casting simulation aims to identify potential defects before the toolpost design is realized in a finished product. The simulation results indicate a total porosity defect of 2%, with defect locations identified in the gating system area and the hole area of the toolpost. Although defects are present, the percentage and locations of these defects are deemed unlikely to affect the functionality of the toolpost. The optimal pouring time is 2.38 seconds, and cooling time is 201.3 seconds to prevent cracking and deformation.

Downloads

Download data is not yet available.

References

[1] Rochim, T. Reverse Engineering (modul workshop Puslitbang PT. PLN). MPE (Mechanical Production Engineering). FTMD-ITB. 2012
[2] B. V. Ramnath et al., "Implementation of reverse engineering for crankshaft manufacturing industry," vol. 5, no. 1, pp. 994-999, 2018.
[3] M. Dúbravčík and Š. J. P. E. Kender, "Application of reverse engineering techniques in mechanics system services," vol. 48, pp. 96-104, 2012.
[4] B. Shabani and Z. J. M. E. S. J. Pandilov, "Analyzing and application of reverse engineering for design and development of mechanical parts," vol. 35, no. 2, pp. 89-96, 2017.
[5] S. Zivkovic, L. Cerce, J. Kostic, V. Majstorovic, and D. J. P. C. Kramar, "Reverse engineering of turbine blades kaplan’s type for small hydroelectric power station," vol. 75, pp. 379-384, 2018.
[6] B. Kareem, A. Olayinka, P. Ikubanni, and F. Akhator, "Implementation of Reverse Engineering and Re-Engineering in the Development of Pin Valve for the Nozzle of Man Diesel Trucks," Building Services Engineering Research and Technology, pp. 1735-1738, 01/01 2019.
[7] M. Furqon, A. Rahayuningtyas, D. D. Hidayat, and Y. J. J. R. T. I. yuwana Martawirya, "Pembuatan Prototipe Produk Rotary Joint," pp. 242-256, 2021.
[8] I. P. Nurprasetio, S. Mejiartono, and A. J. I. J. o. S. T. T. Wibowo, "Design and Prototyping of a Simple Test Rig for Fuel Cock Assy," vol. 5, no. 1, pp. 18-22, 2022.
[9] Kemenperin, Profil Industri Mesin Perkakas, data diperoleh melalui situs internet: https://kemenperin.go.id/download/7548/Profil-Industri-Mesin-Perkakas . Diunduh pada tanggal 17 Oktober 2024.
[10] A. Wibowo, I. Belly, and Y. Yuwana, "Reverse engineering of wörner type drilling machine structure," in IOP Conference Series: Materials Science and Engineering, 2018, vol. 319, no. 1, p. 012018: IOP Publishing.
[11] A. Wibowo, T. Prakosa, and Y. Yuwana, "Strategi Pengembangan Industri Mesin Perkakas Nasional."
[12] H.-C. Möhring, C. Brecher, E. Abele, J. Fleischer, and F. J. C. a. Bleicher, "Materials in machine tool structures," vol. 64, no. 2, pp. 725-748, 2015.
[13] M. F. Ashby and D. J. M. B. Cebon, "Materials selection in mechanical design," vol. 30, no. 12, p. 995, 2005.
[14] American Foundrymen’s Society Training & Research Institute. Basic Principle of Gating and Risering. Golf&Wolf Roads Des Plainers Illinois, 1972.
[15] S. N. Leksono, F. Hamzah, and D. A. Purnomo, "PERANCANGAN DAN PEMBUATAN GATING SYSTEM PADA PRODUK CLAMP SADDLE DENGAN PROSES PENGECORAN LOGAM SAND CASTING," in Proceedings Conference On Design Manufacture Engineering And Its Application, 2022, vol. 6, no. 1, pp. 1-6.
[16] J. Brown, Foseco ferrous foundryman's handbook. Butterworth-Heinemann, 2000.
Published
2024-11-29
How to Cite
[1]
A. Dwiyanto, Hasanudin, M. D. Setiawan, and Kurniawan, “SIMULASI PROSES PENGECORAN DALAM TAHAPAN REVERSE ENGINEERING TOOLPOST MESIN BUBUT KONVENSIONAL”, Journal Technology of Civil, Electrical, Mechanical, Geology, Mining, and Urban Design, vol. 9, no. 2, pp. 213-220, Nov. 2024.
Issue
Vol 9 No 2 (2024): Energy Management and Sustainable Environment
Section
Articles

Copyright (c) 2024 Agus Dwiyanto, Hasanudin, Muhammad Diki Setiawan, kurniawan

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

All articles published Open Access will be immediately and permanently free for everyone to read and download.  We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:
• Creative Commons Attribution-ShareAlike (CC BY-SA)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.