Analisis Batuan Andesit Sebagai Bahan Bangunan Di PT. Harmak Indonesia Desa Hargowilis, Kepanewonan Kokap, Kabupaten Kulon Progo, Daerah Istimewa Yogyakarta

Salsabila Raudlotul Jannah; Novandri Kusuma Wardana; R. Andy Erwin Wijaya

Salsabila Raudlotul Jannah college student
Novandri Kusuma Wardana Institut Teknologi Nasional Yogyakarta
R. Andy Erwin Wijaya Institut Teknologi Nasional Yogyakarta

Keywords: Andesite, Building Materials.

Abstract

Andesite rock is an igneous rock that has an important role in the construction of buildings, infrastructure and roads with various advantages. the use of andesite as a building material must pay attention to various factors, namely size, shape, strength, density, durability and so on and the quality of andesite rocks must also meet certain requirements set out in SNI 03-0394-1989. Therefore, a feasibility study or rock engineering is needed so that the level of feasibility of the rock as a building material can be determined. from the results of the compressive strength test on 4 samples and the average value of compressive strength in andesite rock was 634.43 kg/cmÂ², from the shear resistance test conducted on 2 samples the average value of shear resistance was 16.26%. This water absorption test was carried out on 2 samples of andesite rock aggregates which resulted in an average value of 0.737%. So it can be concluded that the andesitic igneous rock at pt. harmak indonesia is not feasible and does not meet the requirements and quality of natural stone for building materials in accordance with the indonesian national standard (sni 03-0394-1989).

Keyword : Andesite, Building Materials.

References

[1] Direktorat Penyelidikan masalah bangunan. 1982, Persyaratan Umum Bahan Bangunan di Indonesia (PUBI-1982). Jakarta: Depdikbud.
[2] Kementerian Pekerjaan Umum dan Perumahan Rakyat Direktorat Jenderal Sumber Daya Air Balai Teknik Sabo Laboratorium Balai Teknik Sabo. 2022. Hasil Uji Laboratorium Kuat Tekan Batu Uniaksial, Keausan Agregat dengan Mesin Abrasi Los Angeles, Berat Jenis dan Penyerapan Air Agregat Kasar pada PT. Harmak Indonesia. Yogyakarta.
[3] Khosama, L. K. (2012). Kuat tekan beton beragregat kasar batuan tuff merah, batuan tuff putih, dan batuan andesit. Jurnal Ilmiah Media Engineering, 2(1).
[4] Prasadewo, M. L., Rauf, A., & Titisariwati, I. (2016). Potensi Serta Neraca Sumberdaya Dan Cadangan Batu Andesit Di Kabupaten kulon Progo Di Yogyakarta. Jurnal Teknologi Pertambangan 1(2).
[5] Purwasatriya, E. B. (2013). Studi Potensi Sumberdaya Andesit Menggunakan Metode Geolistrik Di Daerah Kokap, Kabupaten Kulonprogo, Daerah Istimewa Yogyakarta. Jurnal Ilmiah Dinamika Rekayasa, 9(2), 55-61.
[6] Putri, F. A. R., Kresno, K., & Siri, H. T. (2016). Estimasi Sumberdaya Andesit Dengan Variabel Jarak Sayatan Di Desa Gerbosari, Kecamatan Samigaluh, Kabupaten Kulon Progo, Yogyakarta. Jurnal Teknologi Pertambangan, 2(1).
[7] Standar Nasional SNI (Standar Nasional Indonesia). 0394-1989, Syarat Mutu Batu Alam untuk Bahan Bangunan.
[8] Standar Industri Indonesia (SII-0378-80). Syarat Mutu Batu Alam untuk Bahan Bangunan.
[9] Standar Nasional Indonesia (SNI 1970:2016). Metode uji berat jenis dan penyerapan air agregat kasar.
[10] Standar Nasional Indonesia (SNI 2417:2008). Cara Pengujian Ketahanan Geser agregat dengan mesin abrasi Los Angeles.
[11] Standar Nasional Indonesia (SNI 2825:2008). Cara Pengujian Uniaksial.
[12] Sudianto, A., Prabowati, D., & Arief, A. A. Analisis Kelayakan Ekonomi Rencana Penambangan Batu Andesit Di Desa Hargorejo Kabupaten Kulon Progo Daerah Istimewa Yogyakarta. Universitas Pembangunan Veteran Yogyakarta.
[13] Suriadi, Sahdan. "Kajian Karakteristik Batuan Beku Andesit Sebagai Bahan Bangunan Di Daerah Sulamadaha Kecamatan Ternate Barat Kota Ternate."Dintek 12.2 (2019).