ANALISIS KESTABILAN LERENG DENGAN MENGGUNKAN METODE PROBABILITAS PADA PENAMBANGAN BATUGAMPING DI PT. CALDOMILL INDONESIA KABUPATEN GUNUNGKIDUL, PROVINSI D.I YOGYAKARTA

Rofa Dzulfikri Bulopa

Rofa Dzulfikri Bulopa Mahasiswa

Abstract

Indonesia is a country that is rich in natural resources, especially the content of certain types of non-metallic minerals so that it is one of the very large potentials. Gunungkidul Regency has a large potential for minerals, especially industrial minerals scattered in several places. PT. Caldomill Indonesia is a limestone mining located in Sidorejo Village, Ponjong District, Gunungkidul Regency, Yogyakarta Special Region Province. This company has been engaged in the production of limestone flour since 2017 and has excavation slopes with slopes ranging from 7 meters to 22 meters while the slope angle is 72Â° to 86Â° which is quite steep. The purpose of this study is to analyze and calculate the value of the safety factor on the condition of the stability of the limestone slopes, and analyze the condition of the slope stability of the company based on the probability of landslides. This research uses probability method in limestone mining at PT. Indonesian Caldomill in Gunungkidul Regency. The results of the slope stability analysis with Monte Carlo simulations obtained a landslide probability value of 15-20% and a maximum FK of 1.273 and a minimum FK of 0.480 including safe based on the standardization of the Minister of Energy and Mineral Resources No. 1827 K/30/MEM/2018 PK 12-50% and FK >1.1 (safe). The results of the Stereographic Projection analysis show that the slopes of the study site have a potential for wedge landslides of 10% and overturning of 10%. Based on the results of rock mass classification using four methods to show the slopes at the research site have good conditions. In the calculation of the RMR obtained a value of 67 rock mass II (strong). For the calculation of SMR obtained a value of 67, rock mass class (II) is good and stable with a landslide probability of 20-40%. While the GSI value is obtained from the SCR parameter of 9 and SR 60 and the condition of the Bloky structure. And the results of the Q-Slope show that the rock slope is in a stable condition at 13.07 at a slope of 72^o.

References

Abramson, Lee W A et al. (2002), Slope Stability and Stabilization Methods, Second Edition, John Wiley & Sons, Inc
Adnan, Fadjar, (2008), â€œAplikasi Simulasi Monte Carlo Dalam Estimasi Biaya Proyekâ€, Jurnal Smartek.
Akbar W. N, 2020. Analisis Kestabilan Lereng Metode Q-Slope Kesetimbangan Batas Dan Probabilitas Longsor Pada Tambang Andesit. Yogyakarta: Prosiding TPT XXIX Perhapi. 689-700
Alkilicgil, C. 2010. Development of A New Method for Mode I Fracture Toughness Test on Disc Type Rock Specimens.Turkey: Middle East Technical University.
Amnirullah, M. F. Et al.2019. Optimasi Kestabilan Lereng Tunggal Lapisan Overburden Rencana Tambang Mahayung Dengan Pendekatan Probabilistik. Bandung: Padjadjaran Geoscience Juornal. 3(6) : 480-488.
Anwar, H.Z., dan Kesumadhama, S., 1991, Konstruksi Jalan di daerah Pegunung- an tropis, Makalah Ikatan Ahli Geologi Indonesia, PIT ke-20, Desember 1991, hal. 471- 481
Azizi, Masagus, 2011. Karakterisasi Parameter Masukan untuk Analisis Kestabilan Lereng Tunggal (Studi Kasus di PT. Tambang Batubara Bukit Asam Tbk. Tanjung Enim, Sumatera Selatan). Prosiding Seminar Nasional AVoER ke-3.Oktober 2011 ISBN : 979-587-395-4
Barton, N. R., Lien, R. dan Lunde, J., 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mechanics, Vol. 6, hal. 189-239. DOI:10.1007/BF01239496
Barton, N. R., Lien, R. dan Lunde, J., 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mechanics, Vol. 6, hal. 189-239. DOI:10.1007/BF01239496
Barton, N., Bar, N., 2015. Introducing the Q-Slope Method and its intended use within Civil and Mining Engineering Projects. EUROCK 2015 & 64th Geomechanics Colloquium, Schubert (ed).
Barton, N., Bar, N., 2017. The Q-Slope Method for Rock Slope Engineering. Rock Mech Rock Eng. Â©Springer-Verlag GmbH Austria 2017.
Bemmelen Van, R.W. 1949. The Geology of Indonesia. Martinus Nyhoff, Netherland: The Haque.
Bieniawski, T. Z., 1973, Engineering Classification of Jointed Rock Masses,
Bieniawski,Z. T.1989. Engineering Rock Mass Classifications : A Complete Manual for Engineers and Geoligist in Mining, Civil and Petroleum Engineering. Wiley-Interscience.
Bowles, J.E. 1989. Sifat-sifat Fisis dan Geoteknis Tanah. Erlangga. Jakarta
Chowdhury, R.N.(1978), Slope Analysis, Elsevier Scientific Publishing Company.
Das, M. Braja, dkk, 1994, Mekanika Tanah II. Prinsip-prinsip Rekayasa Geoteknis.Jilid 1 dan 2, Erlangga, Jakarta.
Deere, D. U. dan Deere, D. W., 1988. The Rock Quality Designation (RQD) Index in Practice. Rock Classification Systems for Engineering Purposes, Kirkaldie, L. (Ed.). American Society for Testing and Material: Philadelphia. Hal. 91-101.
Ducan, Wyllie, C., dan Christopher W. Mah.2004. Rock Sloper Engineering: Civil and Mining, 4rd.(ed). New York : Spoon Press.London.
Dunham, R.J., 1962. Classification of Carbonate Rocks According to Depositional Texture, American Association of Petroleum Geologist Memoir 1,. 108 â€“ 121.
Hirnawan, R. F., 1994, Peran faktor-faktor penentu zona berpotensi longsor di dalam mandala geologi dan lingkungan fisiknya Jawa Barat, Majalah Ilmiah Universitas Padjadjaran, No. 2, Vol. 12, hal. 32-42.
Hirnawan, R.F., 1993, Ketanggapan Stabilitas Lereng Perbukitan Rawan Gerakan tanah atas Tanaman Keras, Hujan & Gempa, Disertasi, UNPAD, 302pp.
Hoek, E. dan Bray, J. (1981) Rock slope engineering. 3rd Ed. Institution of Mining and Metallurgy.
Hoek, E., Brown, E.T., dan Bawden, W.F., 1995. Support of Underground Excavations in Hard Rock. Rotterdam, Balkema.
Hudson, J. A. dan Harrison, J. P. 1997. Engineering Rock Mechanics: an Introduction to the Principles. Elsevier Science, Ltd. Kidlington. United Kingdom.
Irwandy, Arif., 2016. Geoteknik Tambang, Mewujudkan Produksi Tambang yang Berkelanjutan dengan Menjaga Kestabilan Lereng. Jakarta:Gramedia Pustaka Utama.
ISRM (1981). Rock Characterization, Testing and Monitoring. International Society for Rock Mechanics, Suggested Methods.
ISRM Commision On Testing Methods. 1988. Suggested Methods for Determining the Fracture Toughness of Rock. Great Britain : Pergamon Press plc.
Keputusan Menteri Energi dan Sumber Daya Mineral Republik Indonesia Nomor 1827 K/30/MEM/2018, Pedoman Pelaksanaan Kaidah Teknik Pertambangan yang Baik, 7 Mei 2018, Kementerian Energi dan Sumber Daya Mineral, Jakarta.
Made Astawa Rai, Kramadibrata S., Watimena R. K. 2012. Mekanika Batuan. Bandung: Institut Teknologi Bandung.
Masagus, A.Azizi, dkk., (2012), â€œAnalisis Resiko Kestabilan Lereng Tambang Terbukaâ€, Prosiding Simposium dan Seminar Geomekanika Ke-1 Tahun 2012, Jakarta.
Napurri, Jukka. 1988.Surface Drilling and Blasting.Tamrock
Nurhidayat, T. R.I Sophian (2016). Influence Groundwater Levels to Safety Factor of Slope Mining Case Study: Area â€Xâ€,South Sumatera Province,Indonesia. Bandung : Seminal Nasional Ke III Fakultas Geologi Unversitas Padjadjaran no.1.20
Pangular, D., 1985, Petunjuk Penyelidikan & Penanggulangan Gerakan Tanah, Pusat Penelitian dan Pengembangan Pengairan, Balitbang Departemen Pekerjaan Umum, 233 hal.
Pettijohn, F.J. 1975. Sedimetary Rock.New York: Harper and Row
Prastyo,R.D dan Hambali, R. 2014. Analisis Potensi Longsor Pada Lereng Galian Timah (Studi Kasus Area Penambangan Timah Di Jelitik, Kebupaten Bangka). Jurnal Fropil. 1 (2): 69-79
Romana, M. 1993. A Geomechanical Classification for Slopes : Slope Mass Rating. Comprehensive Rock Engineering, Editor : Hudson, J.A. Pergamon
Romana, M., 1985. New Adjustment ratings for application of Bienawski classification to slopes. In International Symposium on the Role of Rock Mecahnics. Zacatecas, Mexico.
Santosa, F. H Putra dan Cahyono, Y.D, Galih. 2020. Analisis Kestabilan Lereng Berdasarkan Probabilitas Kelongsoran Pada Tambang Di PT Gunung Bale, Kabupaten Malang, Provinsi Jawa Timur. Kabupaten malang : PROSIDING, Seminar Teknologi Kebumian dan Kelautan (SEMITAN II). 2 (1) : 423-428.
SKR Cosulting, 2010. Ambang Batas Nilai FK dan PK Lereng Tambang Terbuka. http://www.scribd.com/doc/134464137/probabilitas
Sonmez, H. and Ulusay, R. (1999). Modification to the Geological Strength Index (GSI) and Their Applicability to Stability of Slopes. International Journal of Rock Mechanics and Mining Sciences, 36, 743-760
Steffen, O.K.H., Contreras, L.F., Terbrugge, P.J., Venter, J., 2008, â€œA RiskEvaluation Approach for Pit Slope Designâ€, the 42nd US Rock Mechanics Symposium and 2nd US-Canada Rock Mechanics Symposium, San Francisco.
Sukandarrumidi, (1998), Bahan Galian Industri, Gadjah mada Univercity Press, Yogyakarta.
Sukartono (2013) Buku panduan praktikum geologi struktur. Yogyakarta: Sekolah Tinggi Teknologi Nasional.
Telford, W.M., Geldart, L.P., Sheriff, R.E. 1990. Applied Geophysics SecondEdition. Cambridge: Cambridge University Press. Trans S. Afr. Inst. Civ. Engrs.