PEMBUATAN KITOSAN DARI KULIT UDANG DENGAN EKSTRAKSI MENGGUNAKAN MICROWAVE

  • Ani Purwanti IST AKPRIND YOGYAKARTA

Abstract

The research has been conducted to make chitosan from shrimp shell with extraction using microwave. Microwave is a source of energy for heating and as a catalyst in a chemical reaction. The use of microwaves has advantages, namely short processing time, energy efficiency, easy process control, and produces good quality results. Isolation of chitin is done through three stages, namely demineralization, deproteination, and deacetylation. The process of deacetylation of chitin was done by varying heating time 3, 7, 11, and 15 minutes and varying NaOH concentration 20%, 30%, 40%, and 50%. 1:20 (mass/volume) of chitin were mixed with NaOH at the stage of deacetylation. The mixture put into the apparatus microwave in constant temperature at 60oC. Chitosan was washed until neutral and then was dried in oven until the mass was constant. The characterization was carried out using the Fourier Transform Infrared (FTIR) instrument and then the degree of deacetylation was calculated. The results that showed the degree of deacetylation is 69,7954%, water content 1.90%, and ash content 0.16% was achieved at reaction time in 3 minutes and NaOH concentration in 50%.    

Keyword: Chitin, Chitosan, Microwave

References

[1] Suhardi. Kitin dan Kitosan. Yogyakarta: Pusat Antar Universitas Pangan dan Gizi PAU Universitas Gajah Mada. 1992.
[2] Tolaimatea A, Desbrieresb J, Rhazia M, Alaguic A. Contribution to the Preparation of Chitins and Chitosans with Controlled Physico-chemical Properties. Polymer. 2003, 7939–7952.
[3] Rege PR, Lawrence HB. Chitosan Processing: Influence of Process Parameters during Acidic and Alkaline Hydrolysis and Effect of the Processing Sequence on the Resultant Chitosan’s Properties. Carbohydr. Res. 1999. 321: 235-245
[4] Kurniasih M, Kartika D. Sintesis dan Karakterisasi Fisika-Kimia Kitosan. Jurnal Inovasi. 2011. 5 (1): 42-48
[5] Samar M. Physicochemical, Function, Antioxidant, and Antibacterial, Properties of Chitosan Extracted from Shrimp Wastes by Microwave Technique. Annals of Agricultural Science. 2013. 58(1): 33-41.
[6] Lashini A. Eco-friendly Extraction and Characterization of Chitin and Chitosan from the Shrimp Shell Waste via Microwave Irradiation. Process Safety and Environmental Protection. 2016. 395–405.
[7] Ibrahim A. Effect of some Extraction Techniques on Properties and Economic of Chitosan obtained from Shrimp Shells Waste. Egyptian Journal of Aquatic Biology & Fisheries. 2019. 23(2): 123-131.
[8] Zaeni A. Efek Microwave pada Proses Deasetilasi Kitin dari Limbah Cangkang Udang. Jurnal Aplikasi Fisika. 2017. 13(2): 48–53.
[9] Lahsini A. Rapid and Efficient Extraction of Chitin and Chitosan for Scale-up Production: Effect of Process Parameters on Deacetylation Degree and Molecular Weight. International Journal of Biological Macromolecules. 2019. 1092–1102.
[10] Sudarmaji. Prosedur Analisa untuk Bahan Makanan dan Pertanian. Yogyakarta: Liberty. 1994.
[11] Khan TA. Reporting Degree of Deacetylation Values of Chitosan: The Influence of Analytical Methods. J Pharm Pharmaceut Sci. 2002. 5(3): 205–212.
[12] Lee. How Microwaves Work. Colorado: Colorado University. 2000: 1–3.
[13] Arifin Z. Microwave-Assisted Deacetylation of Chitin from Shrimp Shells. Prosiding Seminar Nasional Teknik Kimia “Kejuangan” Pengembangan Teknologi Kimia untuk Pengolahan Sumber Daya Alam Indonesia. 2000: B2-1–B2-5.
Published
2021-11-09
How to Cite
Ani Purwanti (2021) “PEMBUATAN KITOSAN DARI KULIT UDANG DENGAN EKSTRAKSI MENGGUNAKAN MICROWAVE”, ReTII, pp. 29 - 34. Available at: //journal.itny.ac.id/index.php/ReTII/article/view/2670 (Accessed: 25November2024).