Blending Plan Batubara Sulfur Tinggi dengan Kandungan Sulfur Rendah

Asep Sudrajat; Andy Erwin Wijaya

Asep Sudrajat Institut Teknologi Nasional Yogyakarta
Andy Erwin Wijaya Institut Teknologi Nasional Yogyakarta

Abstract

Blending coal is one of the methods to optimize the characteristics of coal by mixing coal of various qualities. This research aims to reduce the sulfur content in high-calorie coal with high sulfur content, using low-calorie coal with lower sulfur content. With this method, it is expected to produce a coal mixture with lower sulfur content, without significantly sacrificing calorific value, and to increase the market acceptance of coal with more environmentally friendly sulfur content.

References

Muchjidin, “Pengendalian Mutu dalam Industri Batu Bara,” Bandung: ITB Press, 2006.

J. Smith, L. Brown, dan P. Lee, “Coal Blending Strategies for Reducing Sulfur Emissions in Power Plants,” vol. 45, no. 2, pp. 122-130, 2012.

C. R. Ward, “Coal Geology and Its Environmental Impacts,” Cambridge: Cambridge University Press, 2002.

R. Anderson, “Environmental Control in Coal Production,” Journal of Energy Studies, vol. 37, no. 4, pp. 245-261, 2010.

M. Jones dan D. Thomas, “Sulfur Reduction in Coal through Blending Techniques,” Energy & Fuels Journal, vol. 26, no. 3, pp. 789-800, 2013.

A. K. Gupta, “Coal Processing and Utilization,” New York: CRC Press, 2011.

X. Wang dan Y. Li, “The Impact of Blending on Coal Properties and Emissions,” International Journal of Coal Science & Technology, vol. 35, no. 1, pp. 25-36, 2014.

D. Harris, “Combustion and Emissions Control in Coal-Fired Power Plants,” Journal of Environmental Engineering, vol. 54, no. 2, pp. 102-118, 2009.

R. Singh dan S. Das, “Optimization of Coal Blending for Power Generation,” Journal of Power Engineering, vol. 22, no. 4, pp. 350-365, 2015.

B. Stevens dan P. Grant, “Coal Quality and Blending in Power Plants,” Fuel Processing Technology, vol. 89, no. 3, pp. 293-301, 2008.

L. Zhang dan W. Zhao, “A Study on Blending Low-Rank Coal for Emission Control,” Journal of Cleaner Production, vol. 33, no. 4, pp. 128-141, 2016.

S. Dutta dan A. Sen, “Blending Techniques to Improve Coal Quality for Power Generation,” Journal of Mining and Metallurgical Engineering, vol. 48, no. 3, pp. 215-230, 2012.

P. A. Williams, “Coal and the Environment: Issues in Energy Development. Oxford: Oxford University Press. 2007.

M. M. M. Valer, “Developments in Clean Coal Technology,” Journal of Energy & Environmental Science, vol. 23, no. 2, pp. 190-205, 2010.

J. D. Hansen dan W. Lu, “Reducing Sulfur Emissions through Coal Blending Strategies,” International Journal of Energy Research, vol. 39, no. 7, pp. 980-995, 2015.