Blending Plan Batubara Sulfur Tinggi dengan Kandungan Sulfur Rendah

Asep Sudrajat; Andy Erwin Wijaya

Asep Sudrajat Institut Teknologi Nasional Yogyakarta
Andy Erwin Wijaya Institut Teknologi Nasional Yogyakarta

Kata Kunci: Blending Batubara, Kalori Batubara, Kandungan Sulfur

Abstrak

Blending batubara merupakan salah satu metode untuk mengoptimalkan karakteristik batubara dengan cara mencampurkan batubara dari berbagai kualitas. Penelitian ini bertujuan untuk menurunkan kandungan sulfur pada batubara kalori tinggi dengan sulfur tinggi, menggunakan batubara kalori rendah yang memiliki kadar sulfur lebih rendah. Dengan metode ini, diharapkan dapat dihasilkan campuran batubara dengan kandungan sulfur yang lebih rendah, tanpa mengorbankan nilai kalor secara signifikan, serta meningkatkan penerimaan pasar batubara dengan kandungan sulfur yang lebih ramah lingkungan.

Referensi

Muchjidin, “Pengendalian Mutu dalam Industri Batu Bara,” Bandung: ITB Press, 2006.

J. Smith, L. Brown, dan P. Lee, “Coal Blending Strategies for Reducing Sulfur Emissions in Power Plants,” vol. 45, no. 2, pp. 122-130, 2012.

C. R. Ward, “Coal Geology and Its Environmental Impacts,” Cambridge: Cambridge University Press, 2002.

R. Anderson, “Environmental Control in Coal Production,” Journal of Energy Studies, vol. 37, no. 4, pp. 245-261, 2010.

M. Jones dan D. Thomas, “Sulfur Reduction in Coal through Blending Techniques,” Energy & Fuels Journal, vol. 26, no. 3, pp. 789-800, 2013.

A. K. Gupta, “Coal Processing and Utilization,” New York: CRC Press, 2011.

X. Wang dan Y. Li, “The Impact of Blending on Coal Properties and Emissions,” International Journal of Coal Science & Technology, vol. 35, no. 1, pp. 25-36, 2014.

D. Harris, “Combustion and Emissions Control in Coal-Fired Power Plants,” Journal of Environmental Engineering, vol. 54, no. 2, pp. 102-118, 2009.

R. Singh dan S. Das, “Optimization of Coal Blending for Power Generation,” Journal of Power Engineering, vol. 22, no. 4, pp. 350-365, 2015.

B. Stevens dan P. Grant, “Coal Quality and Blending in Power Plants,” Fuel Processing Technology, vol. 89, no. 3, pp. 293-301, 2008.

L. Zhang dan W. Zhao, “A Study on Blending Low-Rank Coal for Emission Control,” Journal of Cleaner Production, vol. 33, no. 4, pp. 128-141, 2016.

S. Dutta dan A. Sen, “Blending Techniques to Improve Coal Quality for Power Generation,” Journal of Mining and Metallurgical Engineering, vol. 48, no. 3, pp. 215-230, 2012.

P. A. Williams, “Coal and the Environment: Issues in Energy Development. Oxford: Oxford University Press. 2007.

M. M. M. Valer, “Developments in Clean Coal Technology,” Journal of Energy & Environmental Science, vol. 23, no. 2, pp. 190-205, 2010.

J. D. Hansen dan W. Lu, “Reducing Sulfur Emissions through Coal Blending Strategies,” International Journal of Energy Research, vol. 39, no. 7, pp. 980-995, 2015.