TECHNO-ECONOMIC ASSESMENT FOR DISTRIBUTED GENERATION PLACEMENT IN DISTRIBUTION SYSTEM

  • Sugiarto Kadiman PS. Teknik Elektro, Departemen Teknik, ITNY

Abstract

This paper presents a proposed function which is known as techno-economic model for optimal placement of distributed generation (DG) resources in distribution systems in order to minimize the power losses and improve voltage profile. Combined sensitivity factors (CSF), such real power loss reduction index, reactive power loss reduction index, voltage profile improvement index, and life cycle cost, and particle swarm optimization (PSO) are applied to the proposed technique to obtain the best compromise between these costs. Simulation results on IEEE 14-bus test system are presented to demonstrate the usefulness of the proposed procedure.

Downloads

Download data is not yet available.

References

Pepermans G, Driesen J, Haeseldonckc D, Belmans R, and Dhaeseleer W. Distributed Generation: Definition, Benefits and Issues. Energy Policy. 2005; 33: 787–798.

The Distribution Working Group of the IEEE Power System Planning and Implementation Committee. 2003. Planning for Effective Distribution. IEE Power and Energy Magazine, Sep/Oct., pp. 54-62,

Haghifam MR, Falaghi H, and Malik OP. Risk-Based Distributed Generation Placement. IET Generation Transmission Distribution. 2008; 2(2): 252-262.

Borges CLT, and Falcao DM. 2006. Optimal Distributed Generation Allocation for Reliability, Losses and Voltage Improvement. Electric Power and Energy System. 2006; 28: 413-420.

Hedayati H., Nabaviniaki S.A., and Akbarimajd A. A. 2008. Method for Placement of DG Units in Distribution Networks. IEEE Transaction on Power Delivery. July. Vol. 23, pp. 1620-1628.

Wang, C., and Nehrir, M.H. 2004. Analytical Approaches for Optimal Placement of Distributed Generation Sources in Power Systems. IEEE Transaction on Power Systems. November, Vol. 19, pp. 2068-2076.

Musa, H., and Adamu, S.S. 2012. PSO based DG sizing for Improvement of Voltage Stability Index in Radial Distribution Systems. Proceedings of the IASTED International Conference Power and Energy Systems and Applications, pp. 175-180.

El-Zonkoly, A.M. 2011. Optimal Placement of Multi-distributed Generation Units Including Different Load Models Using Particle Swarm Optimisation. IEEE Transaction on Generation, Transmission, and Distribution. July, Vol. 2, Issue 7, pp. 760–771.

Shah David T, Wang C, Ochoa LF, and Harrison GP. Assessing the Economic Impact of Distributed Generation on Voltage

Published
2019-06-25
How to Cite
[1]
S. Kadiman, “TECHNO-ECONOMIC ASSESMENT FOR DISTRIBUTED GENERATION PLACEMENT IN DISTRIBUTION SYSTEM”, Journal Technology of Civil, Electrical, Mechanical, Geology, Mining, and Urban Design, vol. 4, no. 1, pp. 1-6, Jun. 2019.
Section
Articles