STUDI KELAYAKAN THERMOELECTRIC GENERATOR DARI ALUMUNIUM (Al) DAN KARBON (C) SEBAGAI SOLUSI LAIN ENERGI TERBARUKAN
Abstract
This study aims to create a prototype of a Thermoelectric Generator which is composed of a set of Aluminum (Al) and Carbon (C) series thermocouples as an alternative energy source. The initial stage in this research is to make a thermoelectric generator that is composed of 120 series thermocouple pairs or consists of 6 thermopiles (20 thermocouple pairs) arranged in series. Then the hot side is given a heat source using an electric iron and the cold side is equipped with a cooling fan and measures the output voltage generated based on changes in the heat generated by the electric iron. The test results show that temperatures up to 50°C produce a DC output voltage with a low increase in voltage change, while above that temperature the output voltage increases significantly. This shows that based on this initial experiment, Al and C thermoelectric generators are feasible to be used as an alternative energy source.
Downloads
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:
• Creative Commons Attribution-ShareAlike (CC BY-SA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.