DESAIN ALAT CUCI TANGAN OTOMATIS PORTABLE DENGAN SENSOR GERAKAN INFRAMERAH

Hasta Kuntara; Muhammad  Anjab Thobarani

doi:10.33579/krvtk.v8i2.4509

Hasta Kuntara ITNY Yogyakarta
Muhammad Anjab Thobarani Institu Teknologi Nasional Yogyakarta

DOI: https://doi.org/10.33579/krvtk.v8i2.4509

Abstract

Abstract This design aims to get a portable automatic hand washing tool with a motion sensor to open the water and soap channels. This tool can provide convenience and hygiene because it does not require touching or opening water and soap channels, which are vulnerable to the spread of viruses for its users. Automatic models of automatic water faucets and portable soap are still limited in existence. The scope of the design is its use without touching the opening of the water channel and soap channel, the tool can be moved easily according to the needs of the placement, water is available in the tank or connected directly to the source, the washing water is stored in the tank or channeled to the reservoir, the PLN electricity supply, and the height Appropriate tool for adults and children. This design produces a portable automatic hand washing machine with a sink height of 1,020 mm, width of 460 mm and an overall height of 1,475 mm, with an infrared motion sensor and control with Arduino Uno and with actuation of water and soap channels using a servo motor.

Keywords: Automatic, Infrared, Portable, Arduino Uno

Downloads

Download data is not yet available.

References

[1] Suyetno, A., Solichin, Wahono, Nauri, I. M. (2020). Diseminasi Teknologi Alat Cuci Tangan Cerdas Higienis Sebagai Sarana Edukasi Pencegahan Covid-19 di Desa Pakisjajar Kabupaten Malang, P2T, 1 (2), 2686–1232.
[2] Ramadan, A. P, Marlinda, L. (2021). Design of automatic hand sanitizer based on Arduino Uno Microcontroller. Sinkron: Jurnal dan Penelitian Teknik Informatika, 6 (1), 157-167.
[3] Abdullahi, H, Muhammad, S. A., Muhammad, B., Shamsu, Abdullahi, I., Tofa, S. I., (2021). Design and Implementation of a Smart Hand Washing Machine Using Arduino, Conference: 1ST Multidisplinary National Conference in Pharmaceutical Science and Technology, PHARMTECH 2021 Kano State Polytechnic.
[4] Li, H. (2018). WristWash: Towards automatic handwashing assessment using a wrist-worn device. International Symposium on Wearable Computers, ISWC, 132–139.
[5] Ikechukwu, G. A., Clementina, O., and Onyebuchi, C. L. (2014). Design and Characterization of Automatic Hand Washing and Drying Machine. American Academic & Scholarly Research Journal, 6 (4), 123–134.
[6] Hoey, J., Poupart, P., Von Bertoldi, A., Craig, T., Boutilier, C., Mihailidis, A. (2010). Automated handwashing assistance for persons with dementia using video and a partially observable Markov decision process. Computer Vision and Image Understanding, 114 (5), 503–519.
[7] Amegah, A. K. (2020). Improving handwashing habits and household air quality in Africa after COVID-19. The Lancet Global Health, 8 (9), 1110–1111.
[8] Sy, J. B., Rojo, M. G., Calibara, E. R., Comendador, A. V., Degife, W. (2020). Multi-Station Automated Hand Washing System (MSAHWS), 3, 36–43.
[9] Famurewa, Akinpelu, Ajimuda, Ewetumo T., Olabiyi. (2020). Development of An Automatic Hand Washing Dispenser Covid 19, International Journal of Recent Advances in Multidisciplinary Research, 7 (6), 5951–5953.
[10] Atsiqa, A., Akbar, K. W. (2022). Arduino Uno Based Automatic Hand Sanitizer, Servo, and Infrared Sensor. Epicentrum, 1 (2), 14–18.
[11] Sairaj, S., Berde, Vaibhav, C., Chavan, Shubham V., Shinde, Prof Dinesh Pargunde. (2018). Design & Fabrication of Automatic Shielded Metal Arc Welding on Mild Steel Plate: A Review. International Journal of Scientific & Engineering Research, 9 (5), 122–120.
[12] Pujo, S., Imam, M. (2008). Analysis of Las SMAW (Shielded Metal Arc Welding) Connection Strength on Marine Plate St 42 Due to Porosity and Incomplete Penetration Defects. ejournal Universitas Diponegoro, Vol. 5, No. 2.
[13] Alkahla, I., Pervaiz, S. (2017). Sustainability Assessment of Shielded Metal Arc Welding (Smaw) Process, IOP Conference Series: Materials Science and Engineering, Vol. 244.
[14] Pathak, D. (2020). Experimental investigation of effects of welding current and electrode angle on tensile strength of shielded metal arc welded low carbon steel plates. Materials Today: Proceedings, 26 (2), 929–931.
[15] Tyagita, D. A. (2016). Tensile Strength Welding Results Smaw St 37 Steel Plate with Liquid Coolant", Ilmiah Inovasi, Vol. 1. No.3. Politeknik Negeri Jember, 180-186.
[16] Faidillah, S. (2019). Effect of AHM Radiant Coolant (RC) Cooling on Tensile Strength of SMAW Welding Results on ST 37 Steel Plate", Repository Universitas Muhammadiyah Jember.
[17] Naharuddin, Sam, A., Nugraha, C. (2015). Kekuatan Tarik dan Bending Sambungan Las Pada Material Baja Sm 490 Dengan Metode Pengelasan SMAW Dan Saw. Jurnal Mekanikal, 6 (1), 550–555.
[18] Šabatka, L., Wald, F., Kabeláč, J., Kolaja, D., Pospíši, M. (2015). Structural Analysis and Design of Steel Connections Using Component Based Finite Element Model. Journal of Civil Engineering and Architecture, 9, 895–901.
[19] Weerasekralage, L. S. S. K., Karunaratne, M. S. A., Pathirana, S.D. (2019). Optimization of Shielded Metal Arc Welding (SMAW) process for mild steel. Annual Sessions of IESL, 841–847.
[20] Setiawan, M.D.I., Pradana, Y.R.A. (2020). Robust parameter design of shielded metal arc welding (smaw) for optimum tensile strength. Journal of Physics: Conference Series.