ANALISA V SLIP PADA SUMUR BUNYU BSB DENGAN METODE MOORE
Abstract
This paper analyzes vslip in the Bunyu, Tarakan, East Kalimantan which is an area located in a hydrocarbon basin. The method used in this study is primary data collection, namely direct observation and taken at the time of drilling and listed in the log bore including the mud weight of the fluid. In this study, the well evaluated is the BSB well, Bunyu field using the Moore method. The dependent variable of this method is to calculate the slip velocity (Vs) with Moore's correlation, namely by looking at the results of the vslip calculation using the Reynolds number. The results of the analysis of this study are at a depth of 5864 ft to 8708 ft, the average value of vslip is smaller than va, vc and vcut, this indicates that the cutting is well lifted from the bottom of the well to the surface, thus avoiding unwanted things such as pipe sticking.
Keywords; Cutting Rheology.Reynold. Moore Corelation
Downloads
Copyright (c) 2022 Sri Haryono Haryono
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:
• Creative Commons Attribution-ShareAlike (CC BY-SA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.